Shoe details, from the sole up.
A shoe is judged from the ground up: the tread, the welt that joins sole and upper, the stack of the heel, the toe cap. Herofab frames one of these as a close-up from a product photo or a delivered image, and is briefed to keep it as the source shows it.
Where a shoe close-up gets inspected.
- 1
Tread, welt and sole edge
The sole or heel entry in the detail list points the close-up at the underside and the edge of the shoe. A tread has a pattern of lugs or grooves, and a welt carries a row of stitches around the forepart. Compare the pattern with the real sole and follow the welt round the toe, where one stitch is easily merged into its neighbour.
- 2
Heel stack and heel tab
A stacked heel shows its layers as fine horizontal lines, a block heel its covering, a trainer its moulded counter and pull tab. Height and pitch belong to the shoe and are briefed to stay. A name pressed into the heel tab or moulded into the sole is small lettering and should be read at full size before publishing.
- 3
Toe cap, eyelets and lace ends
Broguing on a toe cap, a row of eyelets, speed hooks and the aglets at the lace ends are small parts that repeat. Count the eyelets on each side and the perforations along one edge of the cap against the shoe. The lining at the collar, padded or leather, appears only when the source looks into the opening of the shoe.
A shoe photographed so the sole can be seen.
- For the welt, the heel or the sole edge, place the shoe on a plain surface and photograph it in profile at the height of the sole, not from above.
- For the tread, turn the shoe over or stand it on its heel so the whole underside faces the lens; a sole resting on the floor is absent from the photo.
- Lace the shoe evenly, tie or tuck the ends as they should appear, and brush the welt and the grooves clean, since dust in the source is dust in the close-up.
Detail shots for shoes, answered.
Can the close-up show the tread if my photo is a side view?
Only the edge of it. A side view contains the profile of the sole, the welt and the heel, and the close-up is made from that. The pattern underneath is not in such a photo and cannot be reproduced faithfully. Photograph the underside separately and use that photo as the source for a tread close-up.
Does a detail shot work on a shoe worn by a model?
Yes. An image Herofab delivered can be the source, and virtual try-on frames footwear from the knee down, which leaves the shoe large enough for a close-up of the heel or the toe cap. See that a trouser hem does not cover the collar of the shoe and that the foot is turned so the chosen part faces the camera.
Which detail option suits suede, mesh or patent leather uppers?
Fabric texture is the entry for the surface of the upper: the nap of suede, the weave of a knitted mesh, the grain of leather or the gloss of patent. Sole or heel directs the close-up below the upper instead. Suede and mesh need soft side light in the source to show their surface; patent needs a photo without a flash highlight across it.
How much does it cost?
3 credits per image, plus one credit for 4K. The cost is shown before you generate, and if a job fails the credits are returned. The 20 free credits at sign-up cover 6 images with this tool.
Your next collection, shot this week.
20 credits at sign-up, no card required. Images made with free credits carry a watermark.