Jackets on a white background, without a reshoot.
Jackets are usually photographed where they hang: on a rail, a coat hook or the back of a door. The background remover separates the jacket from that setting and delivers it on white, on grey or as a transparent PNG, with the garment left as the camera recorded it.
What stays in a jacket after the cut-out.
- 1
Structure comes from the hanger
A jacket has shoulders, a collar and a front that closes. On a thin wire hanger the shoulders collapse and the lapels fall inward; on a shaped hanger they hold. Since the garment is not redrawn, that structure, good or poor, is what appears on the white background.
- 2
Dark fabric, linings and shadow
Black and navy jackets absorb light, and the folds inside an open front or under a collar go darker still. These shadows sit on the garment and remain. Light the jacket from the front so that the zip, the pocket flaps and the lining at the neck stay readable against white.
- 3
Fur trims, fringe and cuffs
A faux-fur hood trim, a shearling collar, suede fringe or a frayed denim hem ends in loose fibres, the edges a cut-out finds hardest. Sleeves hanging close to the body leave narrow gaps where background can remain. Inspect both on a dark and on a light ground.
Photographing a jacket on its hanger.
- Use a wide, shaped hanger so the shoulders keep their line, and hang the jacket on a plain wall or door that contrasts with its colour.
- Close the zip or the buttons, straighten the collar and the pocket flaps, and pull the sleeves slightly away from the body so each has a clear outline.
- Face a window or use two lamps, one on each side; a single light from above throws the collar's shadow down the front.
White background for jackets, answered.
Should the jacket be photographed zipped or open?
Closed for the main image: it shows the front as designed and gives the cut-out one continuous outline. An open jacket shows the lining, but the two fronts hang unevenly and the gap between them is one more edge to check. An open shot works well as an additional image.
Can the jacket be given a filled, worn shape?
Not by removing the background. A cut-out keeps the jacket as it hung or lay in the photo, flat sleeves and all. When the jacket should stand as a hollow-body 3D form, as though an unseen mannequin wore it, Ghost mannequin is the Herofab tool to use, starting from the same kind of hanger or flat-lay photo.
How do fur collars and fringed hems come out?
They are the edges to judge first. Loose fibres are finer than the rest of the outline, and although the cut-out is briefed to keep them, some strands may be lost or carry a trace of the old wall. Drop the transparent PNG onto a dark colour and then a light one; a fault shows on one of the two.
How much does it cost?
1 credit per image. The cost is shown before you generate, and if a job fails the credits are returned. The 20 free credits at sign-up cover 20 images with this tool.
Your next collection, shot this week.
20 credits at sign-up, no card required. Images made with free credits carry a watermark.