Language: EN
Start free

A T-shirt range in colour, from a single tee.

A T-shirt is typically offered in a long row of colours and photographed in one or two of them. From one product shot or on-model image, Herofab delivers the same image with the tee in another colour, chosen from a palette of shades or matched to a colour reference photo.

Worth knowing

Three decisions behind a T-shirt colour range.

  1. 1

    The chest print: kept or recoloured

    By default the print keeps its own colours while the jersey around it changes, which fits a logo printed in one ink across the range. A print whose ink changes with each colourway, white on navy and black on sand, is set to be recoloured. Either way, read the small lettering in the print and compare it with the source image.

  2. 2

    Rib collar, stitching and labels

    On most tees the neck rib and the stitching at hem and sleeve are in the body colour and change with it. A ringer tee has a contrast collar and sleeve bands, and some styles use contrast thread or a woven hem tag. Check these against the real garment of each colour: a contrast rib should stay contrast, and a matching one should match.

  3. 3

    Heather and marl fabrics

    Grey marl and heathered jerseys are mixtures of light and dark fibres, not flat colours. A variant follows the image it starts from, so a solid tee gives a solid result and a fleck in the source is likely to remain. Start from a photo of the fabric type the colourway is really made of, then compare the result with that garment.

Source photo

The T-shirt image to recolour.

  • Use a product shot or an on-model image in which the whole tee is visible and the chest print lies flat, without a crease running through it.
  • Start from a colour in which the neck rib, the shoulder seams and the hem stitching can be told apart from the body; what the source does not show, no variant will show.
  • For a brand colour or a seasonal shade, photograph a real tee or fabric swatch of that colour in even daylight and upload it as the colour reference.

Choosing T-shirt colours from the palette

The palette covers the colours a basic tee range usually runs through: black, white, off-white, light heather grey, charcoal, navy, royal blue, light sky blue, teal, forest green, olive, sage, red, burgundy, pink, blush, purple, lavender, yellow, mustard, orange, beige, camel and chocolate brown. Each shade goes to the tool with a fixed colour value as well as its name.

A palette name rarely matches a supplier's colour card exactly. Where a tee is sold as a particular shade, such as a washed red or a dusty sage, the colour reference option is the closer route: a photo of the real garment or a swatch in that colour, taken in even daylight. Name the colour in the listing as the supplier names it, and compare each variant with the real garment before publishing.

Slub, piqué and garment-dyed tees in a new colour

The brief changes the base colour and keeps the fabric: texture, stitching, folds, shading and highlights are to stay as photographed, and a knit stays a knit. A slub jersey keeps its irregular yarn and a piqué polo its honeycomb surface only as far as the source records them, so a sharp source in which that surface is visible matters more than the colour it was shot in.

Garment-dyed and washed tees are uneven on purpose: darker at the seams, lighter on the folds. A variant starts from that image, so the light and shade of the source carry into the new colour, and the result deserves a comparison with a real piece in that colour, since a washed red and a washed navy fade differently. A smooth source is not to gain heathering or a weave in the new colour.

A T-shirt range in many colours, from one source image

Each colour is ordered as its own image from the same source, and the framing, the composition and, on an on-model image, the person and the background are briefed to stay. A category page of the range then lines up as one shoot, with the same fold of the hem and the same position of the chest print in every colour, which makes the colours themselves easy to compare.

Start from the colour that shows the garment most clearly. A mid-tone such as light heather grey or sage records folds, seams and the collar rib well, while black hides them and white can burn them out in bright light. When the range includes both very dark and very light tees, one dark and one light tee photographed as sources give two starting points, each closer to its own end of the palette.

Questions

Colour variants for T-shirts, answered.

Can a white T-shirt photo become a black one, or the reverse?

Black and off-white are both shades of the palette, so either can be chosen. These are the largest changes a variant can make: a dark tee hides folds that a light one shows, and a light tee carries shading that a dark one absorbs. Compare such a variant closely with a real garment of that colour, or use a mid-tone tee as the source.

What happens to a multi-colour graphic when the tee changes colour?

With the default setting the graphic keeps its own colours and only the fabric changes. Look at the edges of the graphic, where ink meets jersey, and at any area of the design that used the original fabric colour as one of its colours. That area needs a decision between keeping the print and recolouring it.

Will the model's jeans or jacket change colour along with the tee?

Not when the colour is applied to the main product only, the setting for a listing of the tee itself: the model, the trousers and the background are meant to stay as in the source. The whole-outfit option exists for cases where everything worn should take the new colour. Check the line where the hem of the tee meets the waistband.

Can a T-shirt colour be typed in as a colour code?

No. The colour comes from the palette of named shades or from a colour reference photo; there is no field for a colour code. For a brand colour, photograph a garment or a fabric swatch in that colour in even daylight and use it as the colour reference, then compare the result with the swatch.

Which T-shirt colour works as the source for a whole range?

A mid-tone tee, such as light heather grey, sage or a soft blue, because its folds, seams and rib collar are clearly recorded and both lighter and darker shades can be made from it. A black tee hides much of its structure, and a white one can lose its stitching to bright light.

Which colours can a T-shirt be changed to?

The palette holds named shades: black, white, off-white, light grey, charcoal, navy, royal blue, light blue, teal, green, olive, sage, red, burgundy, pink, blush, purple, lavender, yellow, mustard, orange, beige, camel and brown. For a shade outside that list, a colour reference photo can be added and the tee takes its colour.

Which photos of a T-shirt can be recoloured?

A flat lay, a studio shot or an on-model image of the tee, including an image delivered by another Herofab tool, which can be sent straight to Colour variants. Each colour is a separate image made from that one source, so a photo in which the whole tee is visible and evenly lit gives every variant the same starting point.

How much does it cost?

4 credits per image, plus one credit for 4K. In US dollars that is $0.16 to $0.48 per image before tax, from the largest plan to the smallest credit pack. The cost is shown before you generate, and if a job fails the credits are returned. The 20 free credits at sign-up cover 5 images with this tool.

Examples by product
Get started

Your next collection, shot this week.

20 credits at sign-up, no card required. Images made with free credits carry a watermark. Herofab also removes the watermark from those images once credits are purchased.